How to Apply Window Stickers from the Inside

How to Apply Window Stickers from the Inside

1. Clean the Window
   Thoroughly clean the interior side of the window where you'll apply the sticker. Ensure it's free from dirt, dust, and grease.

2. Prepare the Sticker
   Carefully remove the backing paper from the sticker, exposing the adhesive side.

3. Spray Water Solution
   Lightly spray a mixture of water and a drop of dish soap on the adhesive side of the sticker. This helps with positioning and prevents immediate sticking.

4. Position the Sticker
   Place the sticker on the inside of the window, with the design facing outwards. The adhesive side should be against the glass.

5. Adjust and Smooth
   Gently adjust the sticker to the desired position. Use a squeegee or credit card to smooth out the sticker from the center outwards, removing air bubbles and excess water.

6. Remove Excess Water
   Use a clean, lint-free cloth to absorb any excess water around the edges of the sticker.

7. Allow to Dry
   Let the sticker dry completely for 24-48 hours before exposing it to moisture or extreme temperatures.

8. Final Check
   Once dry, check for any remaining air bubbles and smooth them out if necessary.

Remember, inside window stickers are designed to be read from the outside, so make sure your design is reversed when applying from the inside.